The best articles, pictures and videos for our latest news, insights and events

In this article we will analyse two different inspection methods and their validity conditions.

Internet of things has experienced a period of great development in recent years, covering countless applications. Today it is possible to monitor many different variables on a machine and view them on your PC or smartphone.

The regulation defines how to perform measurements, how to take a technical decision and how to develop a safe and correct process

In the MRT terminology there are two well-known acronyms, LF and LMA, both reported in the main standards: ISO4309 and EN12927.

Magneto inductive equipment is made for inspecting the inner and the outer part of ferro-magnetic ropes.

Choosing a magneto inductive device is not any easy task at all.

Today data are everything. Their analysis and extrapolation allow us to interpret past and contemporary events and under certain hypothesis to forecast the future.

It is well known that MRT theory suggests to fully saturate the rope in order to obtain the maximum advantages in terms of sensitivity of inner defects.

A design customization is always more requested to avoid standard and interface complexity.

In this article, the reader will find all the information for a conscious use of the MRT equipment, perfectly in compliance with the ISO4309 regulation. We hope that this short read will help the rope technicians to evaluate autonomously how to behave during an inspection.