Operational headquarters

Via Pietro Nenni 79/E
10036 Settimo Torinese (TO) – ITALY
T +39 011 0378820
T +39 011 0378821
info@aemmeci.com

AMC DEVICES

Rope

For good lifting, cableways and custom solutions

Rope

Device able to perform non-destructive tests on wire ropes with diameter ranging from 6 to 170 mm

The device works only on ferromagnetic ropes.

The system measures LF and LMA signals, detecting internal and external faults, such as broken wires, corrosion, wear and fretting fatigue.

See technical details
Device able to perform non-destructive tests on wire ropes with diameter ranging from 6 to 22 mm.
Weight
8 kg
Dimensions
30 × 30 × 20 cm
IP

66

Number of ropes that can check simultaneously
1
Encoder and centering system
Su richiesta (suggerito per zipline e per il settore funiviario)
Compliance with EN12927
Yes

Sensors kit

Standard range
22 - 14 mm
Minimum diameter that can be checked (with reduction kit)
6 mm
Number of reduction kits
1

Tool features

Field source
Permanent magnets (NdFeB)
Type of sensors
Coils; Hall Effect Sensors
Type of signal
LF; LMA (upon request)
Signal accuracy
Compliant with EN12927
Max inspection speed 0,02 — 30 m/s
Standard speed range, higher than 8 m/s upon request
Certification
Device able to perform non-destructive tests on wire ropes with diameter ranging from 6 to 28 mm
Weight
10 kg
Dimensions
40 × 40 × 20 cm
IP

66

Number of ropes that can check simultaneously
1
Encoder and centering system
Upon request (suggested for zipline and cableways)
Compliance with EN12927
Yes

Sensors kit

Standard range
28 — 18 mm
Minimum diameter that can be checked (with reduction kit)
6 mm
Number of reduction kits
2

Tool features

Field source
Permanent magnets (NdFeB)
Type of sensors
Coils; Hall Effect Sensors
Type of signal
LF; LMA (su richiesta)
Signal accuracy
Compliant with EN12927
Max inspection speed 0,02 — 30 m/s
Standard speed range, higher than 8 m/s upon request

Device able to perform non-destructive tests on wire ropes with diameter ranging from 22 to 40 mm.

Main features are:

  • Internal centering system (mechanically guided by wheels) that improves signal quality and friction reduction in the bushings;
  • fully integrated Encoder system that localizes the fault.
Weight
20 kg
Dimensions
46 × 28 × 12 cm
IP

66

Number of ropes that can check simultaneously
1
Encoder and centering system
Included
Compliance with EN12927
Yes

Sensors kit

Standard range

40 mm

Minimum diameter that can be checked (with reduction kit)

20 mm

Number of reduction kits
2

Tool features

Field source
Magneti permanenti (NdFeB)
Type of sensors
Coils; Hall Effect Sensors
Type of signal
LF; LMA (upon request)
Signal accuracy
Compliant with EN12927
Max inspection speed 0,02 — 30 m/s
Standard speed range, higher than 8 m/s upon request
Certification

Device able to perform non-destructive tests on wire ropes with diameter ranging from 40 to 65 mm.

Main features are:

  • Internal centering system (mechanically guided by wheels) that improves signal quality and friction reduction in the bushings;
  • fully integrated Encoder system that localizes the fault.
Weight

32 kg

Dimensions

75 × 55 × 45 cm

IP

66

Number of ropes that can check simultaneously
1
Encoder and centering system
Included
Compliance with EN12927
Yes

Sensors kit

Standard range
65 - 40 mm
Minimum diameter that can be checked (with reduction kit)

20 mm

Number of reduction kits
2

Tool features

Field source
Permanent magnets (NdFeB)
Type of sensors
Coils; Hall Effect Sensors
Type of signal
LF; LMA (upon request)
Signal accuracy
Compliant with EN12927
Max inspection speed 0,02 — 30 m/s
Standard speed range, higher than 8 m/s upon request
Certification

Device able to perform non-destructive tests on wire ropes with diameter ranging from 60 to 80 mm.

Main features are:

  • Segnale LF e LMA acquisito digitalmente;
  • Internal centering system (mechanically guided by wheels) that improves signal quality and friction reduction in the bushings;
  • fully integrated Encoder system that localizes the fault
Weight

55 kg

Dimensions
60 × 32 × 40 cm
IP

66

Number of ropes that can check simultaneously
1
Encoder and centering system
Included
Compliance with EN12927
Yes

Sensors kit

Standard range
80 mm
Minimum diameter that can be checked (with reduction kit)

40 mm

Number of reduction kits
2

Tool features

Field source
Permanent magnets (NdFeB)
Type of sensors
Coils; Hall Effect Sensors
Type of signal
LF; LMA (upon request)
Signal accuracy
Compliant with EN12927
Max inspection speed 0,02 — 30 m/s
Standard speed range, higher than 8 m/s upon request
Certification

Device able to perform non-destructive tests on wire ropes with diameter ranging from 90 to 170 mm.

Main features are:

  • Digital acquisition of LF and LMA signals;
  • Internal centering system (mechanically guided by wheels) that improves signal quality and friction reduction in the bushings;
  • Fully integrated Encoder system that localizes the fault.
Weight

200 kg

Dimensions
985 × 550 × 520cm
IP

66

Number of ropes that can check simultaneously
1
Encoder and centering system
Included
Compliance with EN12927
Yes, up to 120 mm (max diameter that can be certified)

Sensors kit

Standard range
170 - 130 - 110 mm
Minimum diameter that can be checked (with reduction kit)

90 mm

Number of reduction kits
Depending on the larger diameter

Tool features

Field source
Permanent magnets (NdFeB)
Type of sensors
Coils; Hall Effect Sensors
Type of signal
LF; LMA (upon request)
Signal accuracy
Compliant with EN12927 and ASTM E1571
Max inspection speed 0,02 — 30 m/s
Standard speed range, higher than 8 m/s upon request
Certification
IAS-T

IAS-T

A tablet for industrial applications combined with an acquisition system.
For inspections in narrow spaces.

Learn more

IAS-H

IAS-H

An acquisition system and integrated computer for a stable inspection even in the most severe environments.

Learn more

CUSTOM SOLUTIONS

Are you looking for a custom solution for a specific plant?

Learn more

Do not miss our news, services and training. Stay tuned!

Operational Headquarters

Via Pietro Nenni 79/E
10036 Settimo Torinese (TO) – ITALY
T +39 011 0378820
T +39 011 0378821
This email address is being protected from spambots. You need JavaScript enabled to view it.

© 2021 - AMC INSTRUMENTS - All rights riserved - P. IVA 09612820010

Cookie Policy - Privacy Policy - Credits